2 Channel Firing System

To make sure that you can use the product safely, please read the introduction seriously and keep it.

ELB seiries firing system is connected by the 220V current electricity to supply power, has product test and line road test function, each group can ignite about 20 pieces.

1. Product test(before you connect with the products)
A. Firing system is connected by the 220V current electricity, the yellow and red indicator shows bright, and this product is normal; If there is any one isn't bright, it means this system can not use.
B. Press telecontrol button, the red light distinguish and the yellow one is more bright, it means the controller runs well.

2. Using method
A. Fireworks product serial or parallel connection firearms black/red catches sockets(in series is better).
B. Line road test: Put on the power switch, connect the products in series, press the relative button on the board or of the remote, if the light of the test is bright, it means the line road is normal, if the products are in parallel connection. (test way is the same as in series)
C. After testing is well-balanced, press the corresponding button (or press the corresponding button of control) to fire.